Drive shaft is an important component of a vehicle and its main job is to transmit the engine power to wheels.
And, guess what? If the wheels is damaged your car will be just out of order.
In this post, I will share how a driveshaft works, symptoms of a driveshaft failure, and how much it cost to repair a driveshaft.
Let’s dive right in!
How A Driveshaft Works?
The driveshaft is what makes any vehicle move by connecting the rear differential to the car’s engine and transmission.
It is a mechanical component shaped like a tube or cylinder which allows the transmission to power the differential. This is how the rear wheels of a standard car are able to move in the first place.
The driveshaft is long since it has to run from the front transmission to the rear differential.
To help with the flexibility of the driveshaft, U-joints are located at both ends of the driveshaft. This allows the driveshaft to flex slightly when driving over bumps, potholes, and other road imperfections.
Without this driveshaft, power wouldn’t be supplied to the rear wheels. But don’t worry because driveshafts won’t just fail instantly unless you are involved in a serious accident.
They tend to slowly deteriorate over time, which gives drivers a chance to notice the symptoms of the failing shaft early on.
But you have to be able to recognize these symptoms in order to take action by replacing your driveshaft. Otherwise, you could end up seriously damaging your car or ending up in a bad accident.
Driveshaft Failure Symptoms
If your car is not moving, it is likely that your driveshaft has broken. You will probably notice that your car has lost power and that it is not running properly. There might be a clicking sound from the transmission.
If you hear a grinding noise coming from the transmission, this is usually a sign that the driveshaft is damaged. You should take your car to a mechanic as soon as possible to check for damage.
Why To Replace Driveshaft?
Driveshafts are the part of your car that transmits power from your engine to the wheels. They help to ensure the smooth transfer of power from the engine to the wheels. It is therefore important to make sure that they are in good condition and functioning properly.
Driveshafts are prone to wear and tear, and can break down if not maintained properly. In most cases, driveshafts are replaced after a certain period of time. However, you can check if the driveshaft is worn out and needs replacement before it becomes a problem.
There are different reasons why driveshafts need to be replaced. One of the common reasons is when you notice that the drive shaft is leaking oil. When this happens, you may need to replace the entire driveshaft.
Another reason is when the drive shaft breaks down. When this happens, you need to replace the damaged part of the driveshaft and then you will have to replace the entire driveshaft.
The driveshaft also needs to be replaced if it is severely bent. If you notice that the driveshaft is bent, you should immediately replace it because the drive shaft is a vital part of your car.
But, where to repair the driveshaft? Wellm check out drive shaft repair near me.
Driveshaft Repair Cost
Driveshafts for front-engine, rear-wheel drive vehicles can vary quite a bit in price depending on the make and model. It can easily approach $2,000 for some vehicles, but you can expect to pay between $400 and $1,260 total.
Labor costs will usually range from $100 to $260 for the one to two hours of work required, and parts alone will cost $300 to $1,000. If you decide to have the work done by an independent repair shop rather than a dealership, you’ll usually pay quite a bit more
In most cases, you will only need to replace one driveshaft if you have a four-wheel drive vehicle.